VU+ Solo2 --- A little setup advice needed please.

I've just upgraded from Dreambox and I'm having a few issues.

I've a fixed Dish Lnb pointing at 28.2E  ( Connected to Solo2 LNB input 2)

and my Technomate TM-2600  (Connected to Solo2 LNB input 1)

With various settings I have had everything working at times but it has been very unstable.

Do you think these settings are wrong please.

TUNER B

Configuration mode............. Advanced

Satellite ...............................28.2E

LNB .....................................LNB 2

Priority..................................Auto

LOF......................................Universal LNB

Voltage mode.......................Polerisation

Increased voltage................No

Tone mode..........................Band

DISEqC mode.....................No

TUNER A

Configuration mode ..................Advanced

Satellite ....................................19.2E        (This sat is stored in my TM-2600 in position 1)

LNB............................................LNB 1

Priority.......................................Auto

LOF...........................................Universal LNB

Voltage mode............................Polerisation

Increased voltage.....................No

Tone mode ...............................Off

DISEqC mode...........................1.2

Toneburst..................................On

Commited DISEqC command....None

Fast DISEqC..............................No

Sequence repeat ......................No

Command order........................Commited Toneburst

Uncommitted DISEqC command......... None

DISEqC Repeats .........................None

Longditute....................................005.100   (I've not altered these values )

                                                    East

Latitude.......................................050.767    (I've not altered these values)

                                                    North

Use USALS for this sat...............No

Stored position...........................001   (This the position that 19.2E is stored in my TM-2600)

Tuning step size........................0.360

Horizontal turning speed............2.3  (I've not altered these values)

Vertical turning speed ...............1.7   (I've not altered these values)

I have repeated the above configuration details for several of my favorite satellites only altering the second line "Satellite" eg to 13.0E and the stored postion to for example 002 Etc.

Thanks in anticipation