Hi,
Almost a year ago I had a problem with my previous internal HDD on my ET9000 and so I bought a new one.
Unfortunately, it is starting to play tricks with me too. 
I recently got the following error:
/dev/sda1: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. (i.e., without -a or -p options)
Here is an output from dmesg:
root@et9x00:~# dmesg
sd 0:0:0:0: [sda] CDB:
cdb[0]=0x28: 28 00 00 00 07 a0 00 00 08 00
end_request: I/O error, dev sda, sector 1956
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0
ata1.00: BMDMA stat 0x4
ata1: SError: { }
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:08:88:07:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:8c:07:00/00:00:00:00:00/00 Emask 0x9 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda]
Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda]
Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 07 8c
sd 0:0:0:0: [sda]
ASC=0x11 ASCQ=0x4
sd 0:0:0:0: [sda] CDB:
cdb[0]=0x28: 28 00 00 00 07 88 00 00 08 00
end_request: I/O error, dev sda, sector 1932
ata1: EH complete
EXT4-fs error (device sda1): __ext4_get_inode_loc:3762: inode #3115: block 243:
comm enigma2: unable to read itable block
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0
ata1.00: BMDMA stat 0x4
ata1: SError: { }
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:08:30:07:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:31:07:00/00:00:00:00:00/00 Emask 0x9 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda]
Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda]
Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 07 31
sd 0:0:0:0: [sda]
ASC=0x11 ASCQ=0x4
sd 0:0:0:0: [sda] CDB:
cdb[0]=0x28: 28 00 00 00 07 30 00 00 08 00
end_request: I/O error, dev sda, sector 1841
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0
ata1.00: BMDMA stat 0x4
ata1: SError: { }
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:08:a0:07:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:a4:07:00/00:00:00:00:00/00 Emask 0x9 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda]
Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda]
Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 07 a4
sd 0:0:0:0: [sda]
ASC=0x11 ASCQ=0x4
sd 0:0:0:0: [sda] CDB:
cdb[0]=0x28: 28 00 00 00 07 a0 00 00 08 00
end_request: I/O error, dev sda, sector 1956
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0
ata1.00: BMDMA stat 0x4
ata1: SError: { }
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:10:80:07:00/00:00:00:00:00/e0 tag 0 dma 8192 in
res 51/40:00:84:07:00/00:00:00:00:00/00 Emask 0x9 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda]
Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda]
Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 07 84
sd 0:0:0:0: [sda]
ASC=0x11 ASCQ=0x4
sd 0:0:0:0: [sda] CDB:
cdb[0]=0x28: 28 00 00 00 07 80 00 00 10 00
end_request: I/O error, dev sda, sector 1924
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0
ata1.00: BMDMA stat 0x4
ata1: SError: { }
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:08:88:07:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:8c:07:00/00:00:00:00:00/00 Emask 0x9 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda]
Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda]
Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 07 8c
sd 0:0:0:0: [sda]
ASC=0x11 ASCQ=0x4
sd 0:0:0:0: [sda] CDB:
cdb[0]=0x28: 28 00 00 00 07 88 00 00 08 00
end_request: I/O error, dev sda, sector 1932
ata1: EH complete
EXT4-fs error (device sda1): __ext4_get_inode_loc:3762: inode #3107: block 243:
comm enigma2: unable to read itable block
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0
ata1.00: BMDMA stat 0x4
ata1: SError: { }
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:08:08:02:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:08:02:00/00:00:00:00:00/00 Emask 0x9 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda]
Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda]
Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 02 08
sd 0:0:0:0: [sda]
ASC=0x11 ASCQ=0x4
sd 0:0:0:0: [sda] CDB:
cdb[0]=0x28: 28 00 00 00 02 08 00 00 08 00
end_request: I/O error, dev sda, sector 520
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0
ata1.00: BMDMA stat 0x4
ata1: SError: { }
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:08:f0:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:f2:01:00/00:00:00:00:00/00 Emask 0x9 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda]
Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda]
Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 01 f2
sd 0:0:0:0: [sda]
ASC=0x11 ASCQ=0x4
sd 0:0:0:0: [sda] CDB:
cdb[0]=0x28: 28 00 00 00 01 f0 00 00 08 00
end_request: I/O error, dev sda, sector 498
ata1: EH complete
EXT4-fs error (device sda1): __ext4_get_inode_loc:3762: inode #205: block 61: co
mm enigma2: unable to read itable block
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0
ata1.00: BMDMA stat 0x4
ata1: SError: { }
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:08:30:07:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:31:07:00/00:00:00:00:00/00 Emask 0x9 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda]
Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda]
Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 07 31
sd 0:0:0:0: [sda]
ASC=0x11 ASCQ=0x4
sd 0:0:0:0: [sda] CDB:
cdb[0]=0x28: 28 00 00 00 07 30 00 00 08 00
end_request: I/O error, dev sda, sector 1841
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0
ata1.00: BMDMA stat 0x4
ata1: SError: { }
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:08:80:07:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:84:07:00/00:00:00:00:00/00 Emask 0x9 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda]
Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda]
Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 07 84
sd 0:0:0:0: [sda]
ASC=0x11 ASCQ=0x4
sd 0:0:0:0: [sda] CDB:
cdb[0]=0x28: 28 00 00 00 07 80 00 00 08 00
end_request: I/O error, dev sda, sector 1924
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0
ata1.00: BMDMA stat 0x4
ata1: SError: { }
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:08:88:07:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:8c:07:00/00:00:00:00:00/00 Emask 0x9 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda]
Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda]
Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 07 8c
sd 0:0:0:0: [sda]
ASC=0x11 ASCQ=0x4
sd 0:0:0:0: [sda] CDB:
cdb[0]=0x28: 28 00 00 00 07 88 00 00 08 00
end_request: I/O error, dev sda, sector 1932
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0
ata1.00: BMDMA stat 0x4
ata1: SError: { }
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:08:a0:07:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:a4:07:00/00:00:00:00:00/00 Emask 0x9 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda]
Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda]
Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 07 a4
sd 0:0:0:0: [sda]
ASC=0x11 ASCQ=0x4
sd 0:0:0:0: [sda] CDB:
cdb[0]=0x28: 28 00 00 00 07 a0 00 00 08 00
end_request: I/O error, dev sda, sector 1956
ata1: EH complete
EXT4-fs error (device sda1): __ext4_get_inode_loc:3762: inode #3114: block 243:
comm enigma2: unable to read itable block
root@et9x00:~#
And here is output from smartctl:
root@et9x00:~# smartctl -a /dev/sda
smartctl 5.42 2011-10-20 r3458 [mips-linux-3.8.7] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST3500418AS
Serial Number: 6VM10A3C
LU WWN Device Id: 5 000c50 013e54b49
Firmware Version: CC34
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Sep 10 20:02:48 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off supp
ort.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 95) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_
FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 088 088 006 Pre-fail Always -
103319861
3 Spin_Up_Time 0x0003 099 097 000 Pre-fail Always -
0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always -
3707
5 Reallocated_Sector_Ct 0x0033 090 090 036 Pre-fail Always -
433
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always -
8709548976
9 Power_On_Hours 0x0032 086 086 000 Old_age Always -
12669
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always -
0
12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always -
3707
183 Runtime_Bad_Block 0x0000 100 100 000 Old_age Offline -
0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always -
0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always -
312
188 Command_Timeout 0x0032 098 098 000 Old_age Always -
4295294982
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always -
0
190 Airflow_Temperature_Cel 0x0022 063 048 045 Old_age Always -
37 (Min/Max 31/48)
194 Temperature_Celsius 0x0022 037 052 000 Old_age Always -
37 (0 15 0 0 0)
195 Hardware_ECC_Recovered 0x001a 033 026 000 Old_age Always -
103319861
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always -
13
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline -
13
199 UDMA_CRC_Error_Count 0x003e 200 195 000 Old_age Always -
144
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline -
102714142902692
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline -
1221977546
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline -
3430642531
SMART Error Log Version: 1
ATA Error Count: 312 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 312 occurred at disk power-on lifetime: 12668 hours (527 days + 20 hours)
When the command that caused the error occurred, the device was active or idle
.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a4 07 00 00 Error: UNC at LBA = 0x000007a4 = 1956
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a0 07 00 e0 00 1d+05:15:37.311 READ DMA
27 00 00 00 00 00 e0 00 1d+05:15:37.283 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 1d+05:15:37.280 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 1d+05:15:37.243 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 1d+05:15:37.163 READ NATIVE MAX ADDRESS EXT
Error 311 occurred at disk power-on lifetime: 12668 hours (527 days + 20 hours)
When the command that caused the error occurred, the device was active or idle
.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 8c 07 00 00 Error: UNC at LBA = 0x0000078c = 1932
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 88 07 00 e0 00 1d+05:15:34.373 READ DMA
27 00 00 00 00 00 e0 00 1d+05:15:34.346 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 1d+05:15:34.343 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 1d+05:15:34.324 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 1d+05:15:34.271 READ NATIVE MAX ADDRESS EXT
Error 310 occurred at disk power-on lifetime: 12668 hours (527 days + 20 hours)
When the command that caused the error occurred, the device was active or idle
.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 84 07 00 00 Error: UNC at LBA = 0x00000784 = 1924
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 80 07 00 e0 00 1d+05:15:31.451 READ DMA
27 00 00 00 00 00 e0 00 1d+05:15:31.424 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 1d+05:15:31.421 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 1d+05:15:31.402 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 1d+05:15:31.357 READ NATIVE MAX ADDRESS EXT
Error 309 occurred at disk power-on lifetime: 12668 hours (527 days + 20 hours)
When the command that caused the error occurred, the device was active or idle
.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 31 07 00 00 Error: UNC at LBA = 0x00000731 = 1841
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 30 07 00 e0 00 1d+05:15:28.577 READ DMA
c8 00 08 08 66 7a e3 00 1d+05:15:28.518 READ DMA
c8 00 08 08 4c 87 e9 00 1d+05:15:28.503 READ DMA
c8 00 08 08 08 00 e5 00 1d+05:15:24.348 READ DMA
c8 00 08 08 aa 5b eb 00 1d+05:15:24.335 READ DMA
Error 308 occurred at disk power-on lifetime: 12666 hours (527 days + 18 hours)
When the command that caused the error occurred, the device was active or idle
.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f2 01 00 00 Error: UNC at LBA = 0x000001f2 = 498
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 f0 01 00 e0 00 1d+05:15:21.226 READ DMA
27 00 00 00 00 00 e0 00 1d+05:15:21.199 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 1d+05:15:21.196 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 1d+05:15:21.178 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 1d+05:15:21.125 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@et9x00:~#
Any chance to bring this HDD to normal operation?